Kalyanjit Ghosh

Greetings!!

I defended my PhD dissertation on 18th June, 2009 at 10:00AM.

PhD Thesis: Effect of Wall Motion on a Two-dimensional Turbulent Boundary Layer (more in the research section)

Adviser: Prof. R.J. Goldstein, Regents' Professor, University of Minnesota, Twin-Cities

List of Publications

Journals

1. Verification of the Clauser Technique in Predicting Wall Shear Stress, K. Ghosh and R. J. Goldstein, in review, AIAA Journal, 2009

2. Effect of Upstream Shear on Flow and Heat (Mass) Transfer over a Flat Plate - Part I: Velocity Measurements, K. Ghosh and R.J. Goldstein, in review, Journal of Heat Transfer, 2009

3. Effect of Upstream Shear on Flow and Heat (Mass) Transfer over a Flat Plate - Part II: Mass Transfer Measurements, K. Ghosh and R.J. Goldstein, in review, Journal of Heat Transfer, 2009

4. Effect of Wake-disturbed Flow on Heat (Mass) Transfer to a Turbine Blade, S.J. Olson, S. Sanitjai, K. Ghosh and R.J. Goldstein, accepted, Journal of Turbomachinery, 2009

5. Investigation of Flow and Heat (Mass) Transfer on a Flat Plate due to an Upstream Shear Opposite to Incoming Flow, draft paper in review, K. Ghosh and R.J. Goldstein

6. Three-dimensional Vortex Flow near the Endwall of a Short Cylinder in Crossflow Part I: Uniform Diameter Circular Cylinder, draft paper in review S.B. Chen, S. Sanitjai, K. Ghosh and R.J. Goldstein

7. Three-dimensional Vortex Flow near the Endwall of a Short Cylinder in Crossflow Part II: Stepped-Diameter Circular Cylinder, draft paper in review S.B. Chen, S. Sanitjai, K. Ghosh and R.J. Goldstein

Conference Proceedings

1. Dynamic Modeling of Thermal Processes in Rotational Molding Operations, K. Ghosh and S. Garimella, ASME Heat Transfer/Fluids Engineering Summer Conference, Charlotte, North Carolina, USA, July 11-15, 2004

2. Effect of Upstream Shear on Flow and Heat (Mass) Transfer over a Flat Plate, K. Ghosh and R.J. Goldstein, ASME IMECE, Boston, MA, November 2008

3. Effect of Wake-disturbed Flow on Heat (Mass) Transfer to a Turbine Blade, S.J. Olson, S. Sanitjai, K. Ghosh and R.J. Goldstein, Proceedings of ASME Turbo Expo 2009, Orlando, Florida, June 2009

4. Effect of Inlet Skew on Heat/Mass Transfer from a Simulated Turbine Blade, K. Ghosh and R.J. Goldstein, abstract submitted to IGTI 2010, Glasgow, UK

5. Investigation of Flow and Heat (Mass) Transfer on a Flat Plate due to an Upstream Shear Opposite to Incoming Flow, K. Ghosh and R.J. Goldstein, abstract submitted to IHTC 2010, Washington, DC