Problem: Cutting Speed

The feed rate is an important process parameter in all machining operations. Combined with the spindle speed it determines the cutting time. Typically feed rate will be set to the highest feasible value to minimize machining time. Other considerations enter into specifying feed rate. Since finished surface roughness and machining forces also depend on feed rate, allowable values of surface roughness and cutting forces may set the upper limit on feed rate.

Click "New Problem" and calculate the turning process parameter required. Note the units requested in the answer. Calculated answers and answers displayed may be slightly different due to rounding of numbers for display.

If you see this message rather than a problem your browser is not enabled for Java.


Back to the Machining page


© 2001 by Barney E. Klamecki. All rights reserved