MINOS MODULE BYPASS FIBER & EXTRUSION LENGTH CHARTS

Technical contact: Rajiv Shivane


Conventions


Fiber lengths

Fiber # Length (mm),
Narrow extrusions
Length (mm),
Nominal extrusions
Length (mm),
Wide extrusions
1 755.2 754.9 754.6
2 665.3 664.6 663.8
3 565.7 564.6 563.5
4 448.9 447.7 446.5
5 294.7 293.6 292.6
6 240.0 240.0 240.0

Extrusion Lengths

Extrusion # Maximum Length (mm) Minimum Length (mm)
1 3697.5 3693.5
2 3719.2 3715.2
3 3749.3 3745.3
4 3791.6 3787.6
5 3856.1 3852.1

Extrusion #6 must have a notch cut in the outside edge. The notch accommodates the outside flange of the bypass. The notch should be centered on the length of the extrusion. The minimum length of the notch is 242 mm. The minimum width of the notch is 19.6 mm.


Thomas R. Chase / trchase@me.umn.edu / June 23, 1999